How To | Reactor Mega

The following information will tell you how to take advantage of the features of the Reactor Mega device.

Change Wattage in TC Mode

While in Ni, SS, Ti, M1, M2, or M3, hold down the menu button and up or down button to increase/decrease wattage then press the firing button.

Charge

We can only recommend using the supplied Micro USB cable and wall plug to charge your device. If you are unable to use the wall plug, do not use any third party wall plugs such as a phone or tablet charger or any USB 3.0 or SS ports. Doing so will void the warranty on the device, and may also be a potential safety concern. You can however, use any USB hubs, portable charging devices or computers with standard USB 1.0 & 2.0 ports.

Once connected to a power source, the battery level indicator on the LED screen will flash until fully charged.  Once fully charged, the battery level indicator will stop blinking, shine for 10 seconds and go out. The Reactor Mega battery will take 6.5 hours to obtain a full charge from its fully drained state.

Power On/Off

Press the firing button 5 times in rapid succession.

Resistance Lock / Unlock

While in a TC or TCR Mode, simultaneously hold the firing and up buttons for 2 seconds to lock or unlock the resistance.

Shift Between °C and °F

If the temperature is increased to 315° C and continue to pres the up button, the temperature reading will automatically change to the lowest Fahrenheit (200° F). Equally, if the temperature is set at the lowest Fahrenheit, and you continue to press the down button, the temperature reading will automatically change to the highest Celsius.

Stealth On/Off

Simultaneously hold the firing and down buttons down for about 3 seconds. In Stealth mode, you can vape and the LED display will not light up. However, you still can press and release the firing button and the display will light up so you may view the settings.

Switch Display Orientation

Power the device off and simultaneously hold the up and down buttons for 5 seconds.

Switch Modes

Press the firing button 3 times, then use the up and down buttons to scroll through the modes.

Wattage Lock  / Unlock

While battery is turned on, hold down the up and down buttons for about 3 seconds.

Please contact our customer support team if you have any additional questions or need help with your device. We can be reached daily from 8:00am-11:55pm EST at 866-305-4256, via chat, or via email at: customersupport@halocigs.com